極限位置 extreme (or limiting) position
極位夾角 crank angle between extreme (or limiting) positions
計算機輔助設計 computer aided design, CAD
計算機輔助制造 computer aided manufacturing, CAM
計算機集成制造系統 computer integrated manufacturing system, CIMS
計算力矩 factored moment; calculation moment
計算彎矩 calculated bending moment
加權系數 weighting efficient
加速度 acceleration
加速度分析 acceleration analysis
加速度曲線 acceleration diagram
尖點 pointing; cusp
尖底從動件 knife-edge follower
間隙 backlash
間歇運動機構 intermittent motion mechanism
減速比 reduction ratio
減速齒輪、減速裝置 reduction gear
減速器 speed reducer
減摩性 anti-friction quality
漸開螺旋面 involute helicoid
漸開線 involute
漸開線齒廓 involute profile
漸開線齒輪 involute gear
漸開線發生線 generating line of involute
漸開線方程 involute equation
漸開線函數 involute function
漸開線蝸桿 involute worm
漸開線壓力角 pressure angle of involute
漸開線花鍵 involute spline
簡諧運動 simple harmonic motion
鍵 key
鍵槽 keyway
交變應力 repeated stress
交變載荷 repeated fluctuating load
交叉帶傳動 cross-belt drive
交錯軸斜齒輪 crossed helical gears
膠合 scoring
角加速度 angular acceleration
角速度 angular velocity
角速比 angular velocity ratio
角接觸球軸承 angular contact ball bearing
角接觸推力軸承 angular contact thrust bearing
角接觸向心軸承 angular contact radial bearing
角接觸軸承 angular contact bearing
鉸鏈、樞紐 hinge
校正平面 correcting plane
接觸應力 contact stress
接觸式密封 contact seal
階梯軸 multi-diameter shaft
結構 structure
結構設計 structural design
截面 section
節點 pitch point
節距 circular pitch; pitch of teeth
節線 pitch line
節圓 pitch circle
節圓齒厚 thickness on pitch circle
節圓直徑 pitch diameter
節圓錐 pitch cone
節圓錐角 pitch cone angle
解析設計 analytical design
緊邊 tight-side
緊固件 fastener
徑節 diametral pitch
徑向 radial direction
徑向當量動載荷 dynamic equivalent radial load
徑向當量靜載荷 static equivalent radial load
徑向基本額定動載荷 basic dynamic radial load rating
徑向基本額定靜載荷 basic static radial load tating
徑向接觸軸承 radial contact bearing
徑向平面 radial plane
徑向游隙 radial internal clearance
徑向載荷 radial load
徑向載荷系數 radial load factor
徑向間隙 clearance
靜力 static force
靜平衡 static balance
靜載荷 static load
靜密封 static seal
局部自由度 passive degree of freedom
矩陣 matrix
矩形螺紋 square threaded form
鋸齒形螺紋 buttress thread form
矩形牙嵌式離合器 square-jaw positive-contact clutch
絕對尺寸系數 absolute dimensional factor
絕對運動 absolute motion
絕對速度 absolute velocity
均衡裝置 load balancing mechanism
抗壓強度 compression strength
開口傳動 open-belt drive
開式鏈 open kinematic chain
開鏈機構 open chain mechanism
可靠度 degree of reliability
可靠性 reliability
可靠性設計 reliability design, RD
空氣彈簧 air spring
空間機構 spatial mechanism
空間連桿機構 spatial linkage
空間凸輪機構 spatial cam
空間運動副 spatial kinematic pair
空間運動鏈 spatial kinematic chain
空轉 idle
